AIR HOSE BGM PRO 40MM  fits  Dellorto PHBL 25

- Product advantages 
- Much more volume than standard airhoses
- Super Strong external ribbing
- Lower drain pipe
- Perfect for both standard and tuned engines
- Uses Original type airbox

In comparison with the standard intake hose, the bgm PRO air intake hose has a higher volume on the side of the carburettor.

The air intake hose is available in four different connection sizes for the carburettor:

40 mm (Dellorto PHBL 25),

42mm (Dellorto PHBH 28-30), 

45 mm (Mikuni TM24 + Dellorto /scootopia/Jetex SH22) 

50 mm (Keihin PWK 28, Polini 28 – 30).

The connection size on the side of the air filter is equal to 42 mm so that you can use the intake hose either with the genuine air filter box or with a foam air filter.

In the download area you can find the chart which shows the difference between the standard Lambretta dl/GP air intake hose and the bgm intake hose. The comparison was made using the Racetour cylinder 225, crankshaft with 58 mm stroke, Keihin 28 PWK, bgm air filter box and bgm Big Box exhaust.

Another significant advantage of the bgm PRO air intake hose is the drain system at the bottom of the intake hose: the fluid expelled from the carburettor does not accumulate in the hose and this prevents the idle speed system from clogging.