MONZA 225 CYLINDER KIT >>>FOR SX GP TV  200 CASING AND 58/107MM CRANK/CONROD, REED VALVE INDUCTION , ALLOY CYLINDER WITH NIKASIL LINING , 7 STUD RECESSED CYLINDER HEAD ,METOER PISTON,GASKETS...

Top quality, Made in Italy! With theMonza racing cylinder Tino Sacchi offers you a valid and tuneable alternative to the long established TS1 kit ( Which is currently out of production)

The Monza cylinder kit is not only outwardly familiar in appearance to the aforementioned TS 1 but, with its aluminium construction and nicasil lined barrel, also an equal on technological terms. The piston rings are of a durable, high quality construction, allowing further enlargement work on all relevant port outlets surrounding the piston ring area during its movement up and down the barrel. The reed valve assembly can be mounted deep within the cylinder construction, so leaving more room under the 'panels to mount (even) larger carburettors :-).

The Monza cylinder promises 'Plug and Play' performance of just about 20 PS at the rear wheel, the 225cc cylinder even more, with 22 ps. The solid build of the base gasket face area offers more than adequate material for extensive porting work, so making any extra welding before porting unnecessary. All this and more makes the Monza cylinder an ideal basis for your next LAMBRETTA tuning project.

Aluminium/Nicasil lined/ 70mm diameter cylinder bore/ 6 transfer ports/ 2 piston rings

High quality aluminium cylinder with six transfer ports, available with a 70mm bore according to cylinder capacity, includes a piston equipped with two piston rings each 1mm thick, cylinder head according to bore diameter, reed valve manifold, reed valve assembly to fit, all necessary fixings and gaskets(head gaskets in various thicknesses, base gasket and the manifold gaskets)

 

Ideally we recommend the Monza kit to be used with a 30mm PHBH Dellorto carburettor, and either the JL3 or JL4 exhaust for maximum power and rideeabilty.

Write a review

Note: HTML is not translated!
    Bad           Good

MONZA 225 CYLINDER KIT

Out Of Stock
  • £569.99

  • Ex Tax: £474.99

Related Products

JL 3 RACE EXHAUST

JL 3 RACE EXHAUST

LAMBRETTA  JL 3  Fast road / race exhaust.Ideal for TS1, Rapido, Imola ,Monza ,CASA 185 ,C..

£365.00 Ex Tax: £304.17

CARB- DELLORTO 30mm PHBH CARB

CARB- DELLORTO 30mm PHBH CARB

DELLORTO CARB 30mm PHBH INCLUDESJETS AS STANDARD :- 40 SLIDE,  X2 NEEDLE, 115 MAIN JET ,55..

£97.50 Ex Tax: £81.25

ANCILLOTTI SEAT- ORANGE LOGO AND PIPING

ANCILLOTTI SEAT- ORANGE LOGO AND PIPING

Lambretta series 1 2 3 & GP ancillotti seat. The seat has orange top piping and writing , it has a m..

£105.99 Ex Tax: £88.33

GORI SPORT RACING SEAT- bolt down

GORI SPORT RACING SEAT- bolt down

Lambretta Series 1,2,3 and GP models , GORI ultra lightweight traditional sports racing seat. Fixed ..

£0.00 Ex Tax: £0.00

 CYLINDER STUD 8MM HIGH QUALITY -PIAGGIO

CYLINDER STUD 8MM HIGH QUALITY -PIAGGIO

Higher Quality Genuine Piaggio Cylinder stud 8mm X 160MM For all Lambretta models and For p/px 200 ..

£4.30 Ex Tax: £3.58

JL 3 RACE EXHAUST END CAN BRACKET

JL 3 RACE EXHAUST END CAN BRACKET

LAMBRETTA  JL 3 Fast road / half race exhaust end can bracket...

£22.20 Ex Tax: £18.50

ANCILLOTTI SEAT- YELLOW LOGO AND PIPING

ANCILLOTTI SEAT- YELLOW LOGO AND PIPING

Lambretta series 1 2 3 & GP ancillotti seat. The seat has yellow top piping and writing , it has..

£99.99 Ex Tax: £83.33

JL  RACE SUPER TOURER EXHAUST-TS1

JL RACE SUPER TOURER EXHAUST-TS1

LAMBRETTA  JL RACE SUPER TOURER  EXHAUST IDEAL FOR TS1,CASA 200/225 engines good all ..

£365.00 Ex Tax: £304.17

JL  SUPER TOURER EXHAUST -RB

JL SUPER TOURER EXHAUST -RB

LAMBRETTA  JL RACE SUPER TOURER  EXHAUST  RB 200 225 250 CYLINDER ONLY The JL Su..

£365.00 Ex Tax: £304.17